Locate the Tunnel

Locate the Tunnel

Look for a fresh mound of soil. Probe 6 -10 inches away from the mound, ideally between two mounds. The tunnel is found when the Probe pushes through the soil with less resistance.

Note: The Probe is housed inside the Wedge.

Create the Hole

Create the Hole

Use the Wedge to make a hole down to the tunnel. With a stirring motion, boar a hole down to the base of the tunnel.

Continue until the base of the tunnel is reached.

Set the Trap

Set the Trap

Insert the unset trap to the base of the tunnel. To set do NOT push downward, instead brace the endcap with a flat hand while pulling up on the black tube until it locks in place.

Strike to Unset

Strike to Unset

To deactivate or unset trap strike the black tube. Always keep fingers out of and away from the trap straps.